SD card slotΒΆ
The devices are equipped with an additional SD card slot to store customer
data. When an SD card is inserted, it is accessible through the linux device
/dev/mmcblk1
, and if the SD card contains multiple partitions they
appear as /dev/mmcblk1p1
, /dev/mmcblk1p2
and so on.
Supported filesystems are FAT/FAT32 and ext2/3/4 by default.
Please note, that the filesystems on SD card are not automatically mounted, you can do this manually e.g. by
mount /dev/mmcblk1p1 /mnt
Do not forget to unmount the filesystem before removing the SD card, otherwise you will most likely loss data, depending on the filesystem you used.
Note 1: It is not possible to boot a Duckbill 2 device from SD card as it was possible for former Duckbill series. Duckbill 2 series devices always boot from internal eMMC flash (however, it would be possible to instruct U-Boot to not load linux kernel/root filesystem from eMMC but from SD card).
- Note 2: Support for the SD card slot was introduced with BSP v1.3 for
- Duckbill 2 and Duckbill 2 EnOcean, and with BSP v1.4 for Duckbill 2 485/485+.